Compared with other metal materials, titanium alloy seamless tube has the following advantages :1.High specific strength (tensile strength/density) (see figure). The tensile strength can reach 100 ~ 140kgf/mm2, and the density is only 60% of steel.2.The medium temperature strength is good, the use temperature is several hundred degrees higher than the aluminum alloy, at medium temperature can sti...

Seamless titanium tubes are widely usedTitanium tube has the advantages of light weight, high strength and superior mechanical properties.Widely used in heat exchange equipment, such as tube heat exchanger, coil heat exchanger, serpent tube heat exchanger, condenser, evaporator and pipeline, etc.Titanium tube according to the use of requirements and performance of the different implementation of t...

There are more than 160 titanium alloy manufacturers in China. There are few enterprises with good independent research and development ability, high product technical content and excellent brand characteristics. Most of them are concentrated in the middle and low-end fields, especially the low-end market with excess capacity and fierce competition.China's petrochemical, aerospace, electric power,...

the rolling of titanium seamless pipe in general is processed by reciprocating cold rolling mill (i.e., peel format). In the processing process, the two-roll (LG) and multi-roll (LD) mills are generally used for multi-pass rolling.In the process of deformation, with the rolling mill rotation and feed, gradually reduce the wall, reduce the diameter, the unit length of the pipe in a rolling path gen...

Titanium tube is light in weight, high in strength and superior in mechanical properties.It is widely used in heat exchange equipment, such as tube heat exchanger, coil heat exchanger, coil heat exchanger, condenser, evaporator and pipeline.At present, many nuclear power industry titanium tube as the unit standard.Titanium tubes according to the use requirements and performance of the different im...

Titanium Cathode Plate is mainly used in electrolysis and wet metallurgical industry, new technology of producing starting ti plate, titanium plate of application is of great significance in copper electrolysis production, to improve the quality of electrolytic copper level, production of high purity Yin grade copper, provides a very favorable conditions:1. Titanium cathode has good chemical stab...

Coating titanium Anode DSA (Dimensionally Stable Anode), also known as Dimensionally Stable Anode, is a new insoluble Anode material developed in the late 1960s.The Dimensionally Stable Anode, which is also known as Dimensionally Stable Anode, is the Anode of platinum, graphite and lead alloyThe traditional anode materials are roughly divided into three categories: platinum, graphite and lead allo...

Gu eagle 2.0 first flight successfully using titanium alloy has significant improvementRecently, the domestic newest four major advanced generation stealth fighter - Gu eagle 2.0 first flight successfully.Of shenyang university of aeronautics and astronautics increase material manufacturing titanium alloy bearing components provided by the first flight in Gu eagle 2.0 play a major role, it also ma...

1, argon arc welding seam on the back should be ahead of plenum, traffic, appropriate air after discharge, flow decreases.During the welding process should be continuously to the tube filled with argon.Stop lagging gas welding, make the welds are fully protected.Another should pay special attention to the air after the net can be welded, or influence the protection of argon filling effect.2, the a...

ENi - 1Welding nickel alloy and nickel plated steel 200, 201;Steel with nickel welding of dissimilar materials;The surface of the steel welding.ENiCu - 7MONEL alloy 400 own welding;And 400 MONEL alloy and steel welding;Used for surfacing of steel.ERNiCu - 7MONEL alloy welding, 400 and 400 MONEL alloy with the welding of steel;Using submerged arc welding method for surfacing welding the steel surfa...

Niobium is a steel gray luster of refractory metals, its melting point is 2467 ℃, density of 8.6 g/cm 3.Niobium has good low temperature plastic, can be processed into a variety of cold pressure semi-finished products.High temperature resistance, strength, above 1000 ℃ still has enough strength, plasticity and heat conductivity.At extremely low temperature superconductivity is best, such as about ...

Niobium is a steel gray luster of refractory metals, its melting point is 2467 ℃, density of 8.6 g/cm 3.Niobium has good low temperature plastic, can be processed into a variety of cold pressure semi-finished products.High temperature resistance, strength, above 1000 ℃ still has enough strength, plasticity and heat conductivity.At extremely low temperature superconductivity is best, such as about ...

TANTALUM (temple), TANTALUM, Ta, element symbols of wealth derived from Greek mythology the king Tantalus, discovered in 1802.Almost completely does not move by erosion, tantalum in surgery, has great contribution for the body's repair: it can replace the skeleton (skull, for example);Made of foil or silk thread can connect broken nerve;Woven mesh yarn can be used to bandage abdominal muscles. ...

Non-ferrous metal alloy and classificationWhat is a non-ferrous metal alloy, the answer is;In a non-ferrous metal as the substrate, by adding one or several other metal or nonmetal elements, composed of both has the matrix metal connectivity, but also has some of the specificity of the material, called non-ferrous metal alloys.Non-ferrous metal alloy classification method are many, usually there a...

Screw specification definition and understanding一. Thread typeA: triangular thread (60 degrees) : combining/lockB: work triangular thread (55 degrees) : combine/lockC: trapezoidal thread (30 or 29 degrees) : power transmissionD: square thread (90 degrees) : power transmission二. Common screw types:A: the Machine Screw, Machine ScrewB: Tapping Screw, self-tapping Screw (points used in metal and used...

Industrial pure titanium and chemical pure titanium difference is: it contains more oxygen. Nitrogen, carbon and many other magazines elements (such as iron, silicon, etc.), it is essentially a kind of low alloy content of titanium alloy.Compared with chemical pure titanium, because contain more magazine elements make the strength greatly improved, its mechanical properties and chemical similar to...

What are the advantages of plating using insoluble anodeAdvantages:Of the anode geometry size remains the same, so that the current and metal distribution can be optimized and maintain;Insoluble anode don't need to have coating, not meet high barrier property anodic film (plating efficiency loss) or decomposition products gathered and related problems, these problems will affect the anode and the ...

Titanium base plating platinumelectrode is the use of special plating process, on the surface of the titaniumsubstrate that through specialized processing platinum plating, can allplatinum plating or local platinum plating, more can platinum plating ontitanium package composite materials such as copper. Product surface is silverywhite, with uniform fine coating, combined with the strong, large out...

Surface finish & Characteristics and application NO.1 Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem ical devices. NO.2D Cold-rolled, annealed and pickled without skinpassing the dull products can be used as automobile parts, building materrials and pipings. NO.2B The surface brightness and f...

1. The corrosion types and definition In many industrial applications, stainless steel, can provide satisfactory corrosion resistant performance today.According to the use of experience, in addition to the mechanical failure, the corrosion of stainless steel mainly displays in: the a serious corrosion of stainless steel in the form of local corrosion (i.e. stress corrosion cracking, pitting cor...

1791 British minister w. Gregor (Gregor) in black magnetite discovered a new kind of metal elements.In 1795, German chemist M.H. carat Mr. Preuss (Klaproth) in the study of rutile also discovered the elements, and named after the Greek god Titans back.In 1910, American scientists bioarchaeology Hunter (Hunter) for the first time used sodium reduction TiCI: making the pure titanium.1940 Luxembourg ...

The new technology of processing Titanium Nickel wire:Tohoku university institute of materials research success a nickel titanium shape memory silk material of new technology, called bag - clastic extrusion method.The processing method of process mainly includes the following basic steps:A, through the preparation of different metal cladding rolling multilayer composite sheet, all kinds of metal l...

Recent CCTV program "face-to-face" Sun Cong, chief designer of fighters to 15 for the interview, which revealed a lot of important information about the "flying shark" development.Including Sun Cong on CCTV, also specifically talked about "next generation aircraft must also be arranged".Fans of the military aircraft is more full of looking forward to the future of China.But we are looking forward ...

Nature of ilmenite ore dressing processTitanium is a kind of important and has extensive USES the important structure of the metal, titanium alloy titanium alloy has high strength, good corrosion resistance and high heat resistance and is widely used in various fields..Many countries in the world is to know the importance of the titanium alloy material, so far the development of high temperature c...

Titanium's three big functions:1. The memory functionTitanium - nickel alloy under a certain environment temperature has a one-way, two-way and a full range of memory effect, is a recognized is the best memory alloy.On engineering pipe joint for fighter aircraft hydraulic system;Oil cartel pipelines system;Diameter of 0.5 mm wire made of 500 mm diameter parabolic mesh antenna used for aerospace ai...

Titanium is a kind of very reactive metals, the equilibrium potential is very low, the thermodynamic corrosion tend to be large in the medium.But in fact, titanium in many medium is stable, such as titanium in oxidizing, neutral and weak reducing medium is corrosion resistant.This is because has a great affinity, titanium and oxygen in the air or oxygen medium, and generate a dense layer of titani...

The ten performance of titanium:The ten performance of titaniumTitanium density of 4.51 g/cm3, below aluminum and above the steel, copper, nickel, but strength is located in the top of the metal.Corrosion resistance ofTitanium is a kind of very reactive metals, the equilibrium potential is very low, the thermodynamic corrosion tend to be large in the medium.But in fact, titanium in many medium is ...

Biomedical materials is an important branch of material science, and is used in the diagnosis, treatment or replace the body's tissues and organs or improve its function, high technology content and high economic value of new carrier materials, is a in materials science and technology is developing a new field.Biomedical materials to explore the mysteries of human life, safeguard huma...

Immersion Busbar: (Ti clad Cu, Zr clad Cu ,316L clad Cu) Current-transfer under solution result in low potential and high efficiency. Non-copper oxide, free maintenance.Good for long-term operation. Current supply is stable.Non fall-off of deposited impurities and copper oxide cause the easy management solution.High current transfer doesn’t cause heat generation to reduce loading of ve...

Apple launched this titanium shell computer can challenge Japan's SONY corporation adopts magnesium alloy shell of computer, not only have beautiful appearance, but also has excellent performance.Titanium compared with magnesium, high tensile strength (44.4 GPa) titanium 106.3 GPa, magnesium, and low thermal conductivity, titanium for 17 w/m.K, only one over ten of the magnesium (159 w/m.K), so th...