ASTM B338 Titanium seamless tube

group name: Titanium zirconium nickel and its alloy pipe series products

Min Order: 1 piece

brand name: Special Steel Titanium Industry

model: Dia 25.4*0.7mmT

Nearest port for product export: Shanghai, Tianjin, Beijing, Xi'An

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW

Acceptable payment methods: T/T, L/C

update time: Thu, 21 Nov 2024 14:41:05 GMT

contact supplier

Paramtents

ASTMB 337 ASTMB 338
titanium alloy has low density high specific strength
good corrosion resistance low thermal conductivity
non-toxic, non-magnetic, solderable, good biocompatibility

Packging & Delivery

Min Order1 piece

Briefing

Titanium seamless pipe widely used in heat exchange equipment, such as tube heat exchanger, coil heat exchanger.

Detailed

Advantages and Application of TitaniumSeamless Pipe：

First, theadvantages: titanium alloy has low density, high specific strength, goodcorrosion resistance, low thermal conductivity, non-toxic, non-magnetic,solderable, good biocompatibility, strong decorative surface and so on.Application: widely used in heat exchange equipment, such as tube heatexchanger, coil heat exchanger, snake tube heat exchanger, condenser,evaporator and conveying pipe, etc. Many nuclear power industries use titaniumtubes as standard tubes for their units. Titanium tube according to the userequirements and performance of the implementation of two national standards:GB / T3624-2010 GB/T3625-2007 ASTM 337/ 338

规格和说明

牌号	供应状态	制造方法	外经（mm）	壁厚（mm）
牌号	供应状态	制造方法	外经（mm）	0.5	0.6	0.8	1.0	1.25	1.5	2.0	2.5	3.0	3.5	4.0	4.5
TA1TA2TA9TA10	退火状态（M）	冷轧（冷拔）	10-15	○	○	○	○	○	○	○	—	—	—	—	—
			﹥15-20	—	○	○	○	○	○	○	○	—	—	—	—
			﹥20-30	—	○	○	○	○	○	○	○	—	—	—	—
			﹥30-40	—	—	—	—	○	○	○	○	—	—	—	—
			﹥40-50	—	—		—	—	○	○	○	○	—	—	—
			﹥50-60	—	—	—	—	—	○	○	○	○	○	—	—
			﹥60-80	—	—	—	—	—	—	○	○	○	○	○	○
		焊接	16	○	○	○	○	—	—	—	—	—	—	—	—
			19	○	○	○	○	○	—	—	—	—	—	—	—
			25、27	○	○	○	○	○	○	—	—	—	—	—	—
			31、32、33	—	—	○	○	○	○	○	—	—	—	—	—
			38	—	—	—	—	—	○	○	○	—	—	—	—
			50	—	—	—	—	—	—	○	○	—	—	—	—
			63	—	—	—	—	—	—	○	○	—	—	—	—
		焊接—轧制	6-10	○	○	○	○	○	—	—	—	—	—	—	—
			﹥10-15	○	○	○	○	○	○	—	—	—	—	—	—
			﹥15-20	○	○	○	○	○	○	○	—	—	—	—	—
			﹥20-25	○	○	○	○	○	○	○	—	—	—	—	—
			﹥25-30	○	○	○	○	○	○	○	—	—	—	—	—
注：“○”表示可以生产的规格